Boat Speed Calculator

Enter your engine power, boat weight and boat type to estimate top speed, or solve for the horsepower or displacement you need.

Boat details

Find
Used for Speed and Displacement
Used for Speed and Power
Used only when Boat type is Custom constant
Used for Power and Displacement

Embed this calculator

Copy this code into your page. Please keep the link under the calculator.

Ad slot

How to use the boat speed calculator

  1. Pick what you want to find: Speed, Power or Displacement.
  2. Enter the shaft horsepower and choose hp or kW.
  3. Enter the boat displacement (the total weight of the loaded boat) and choose lb, kg or tonnes.
  4. Choose the boat type. The Crouch constant is filled in for you, or pick Custom constant and type your own.
  5. If you are solving for power or displacement, enter the target speed in mph, km/h, knots or m/s.

The result updates as you type. The breakdown shows the speed in mph, km/h and knots, plus the power and displacement in both unit systems.

Crouch's formula for boat speed

Crouch's formula estimates the top speed of a boat from the power it delivers and the weight it has to push through the water:

Speed (mph) = √(Power ÷ Displacement) × C
Power (hp) = (Speed ÷ C)² × Displacement
Displacement (lb) = Power ÷ (Speed ÷ C)²

Here P is shaft horsepower, D is displacement in pounds, S is speed in miles per hour and C is the Crouch constant. The formula is calibrated for these units, so the calculator converts kW, kg, tonnes, km/h, knots and m/s for you before it applies it.

Worked example: find the speed

A racing hydroplane has a 3,000 hp engine and displaces 6,800 lb. The Crouch constant for hydroplanes is 220.

S = √(3000 ÷ 6800) × 220 = 0.6642 × 220 = 146.13 mph

That is about 235.2 km/h or 127.0 knots.

Worked example: find the horsepower

You want a 6,000 lb hydroplane to reach 150 mph:

P = (150 ÷ 220)² × 6000 = 0.4649 × 6000 = 2,789 hp

So you need an engine delivering roughly 2,800 shaft horsepower.

What is boat displacement?

Displacement is the weight of the water a floating boat pushes aside, and by Archimedes' principle it equals the weight of the boat. Use the loaded weight: hull, engine, fuel, water, gear and passengers. A lighter boat with the same engine always goes faster, which is why trimming weight is one of the cheapest ways to gain speed.

Crouch constant by boat type

The constant describes how efficiently a hull type converts power into speed. Higher values mean a hull that planes more easily.

Crouch constant (C)Boat types
150Cruisers, passenger vessels, average runabouts
190Light high-speed cruisers, high speed runabouts
210Racing boats
220Hydroplanes
230Racing catamarans, sea sleds

Top speed reference table

Estimated top speed in mph for an average runabout (C = 150):

Displacement100 hp200 hp300 hp500 hp1,000 hp
1,500 lb38.754.867.186.6122.5
2,500 lb30.042.452.067.194.9
4,000 lb23.733.541.153.075.0
6,000 lb19.427.433.543.361.2

How much horsepower do you need?

Shaft horsepower needed for a 3,000 lb boat at different target speeds:

Target speedC = 150 (runabout)C = 190 (high-speed runabout)
30 mph120 hp75 hp
40 mph213 hp133 hp
50 mph333 hp208 hp
60 mph480 hp299 hp
70 mph653 hp407 hp

Notice how power climbs with the square of speed. Going from 40 to 60 mph needs more than double the horsepower, not 50% more.

Unit conversions used

QuantityConversion
Power1 kW = 1.341022 hp
Displacement1 kg = 2.204623 lb; 1 tonne = 2,204.623 lb
Speed1 km/h = 0.621371 mph; 1 knot = 1.150779 mph; 1 m/s = 2.236936 mph

Tips and common mistakes

  • Use shaft power, not the sticker rating. The engine rating at the crankshaft is higher than the power that reaches the propeller after gearbox and shaft losses.
  • Use the loaded weight. Fuel, passengers and gear all add to displacement and lower the speed.
  • Do not mix units. Pick the correct unit in each drop-down, because kg and lb differ by more than a factor of two.
  • Choose the closest boat type. A wrong constant changes the answer directly, so 150 versus 190 is a 27% difference in speed.
  • Treat slow, heavy hulls with care. Full displacement hulls are limited by waterline length, roughly 1.34 × √(length in feet) knots, so Crouch's formula can overestimate them.

Limits of the formula

Crouch's formula is a preliminary design tool. It does not include propeller choice, hull length, deadrise, wind, waves or fouling. Use it to compare options and sanity-check numbers, and ask a naval architect or the engine manufacturer before you size an engine or make a purchase. Speed on the water is also a safety matter, so always follow local rules and operate within the limits of your boat and your crew.

Frequently asked questions

How do I calculate a boat's top speed?

Divide the shaft horsepower by the displacement in pounds, take the square root, then multiply by the Crouch constant. The answer is in miles per hour.

What is Crouch's formula?

Crouch's formula is S = √(P ÷ D) × C, where S is speed in mph, P is shaft horsepower, D is displacement in pounds and C is a constant that depends on the boat type. Designers use it for quick early estimates of planing and high-speed hulls.

Which Crouch constant should I use?

Use 150 for cruisers, passenger vessels and average runabouts, 190 for light high-speed cruisers and high speed runabouts, 210 for racing boats, 220 for hydroplanes and 230 for racing catamarans and sea sleds. If you know a better value for your hull, choose Custom constant and enter it.

How much horsepower do I need for my boat?

Switch the calculator to Find Power, then enter the speed you want, your boat displacement and the boat type. The formula P = (S ÷ C)² × D gives the shaft horsepower required.

Does boat length change the result?

No. Crouch's formula uses power, displacement and a type constant, and it does not include hull length. For slow displacement hulls, waterline length matters more, so treat the answer as a rough guide.

Why is my real boat speed different from the estimate?

The formula ignores propeller efficiency, drag from marine growth, wind, waves, trim and the actual load on board. Shaft horsepower is also lower than the engine rating at the crankshaft, so use shaft power when you can.